                
|
HYDROS 100 Thermal Conductivity Analyzer
|
 |
- External universal power supply
- Single channel analyzer with rugged design for mobile and stationary use (¼ 19", 3 HU)
- Corrosion-resistant thermal conductivity cell (optional: stainless steel, Hastelloy)
- User-friendly front panel and keypad
- Optically isolated, adjustable analog voltage and current outputs
- Digital outputs for selectable concentration alarms and valve control
- Serial interface for data transfer and remote analyzer control
- Self-diagnostics with alarm display and relay contacts
- Autocalibration with external valve block
- Two measuring ranges available via analog outputs
- Two different gas mixture configurations selectable (via second analog output)
- Cross compensation of up to 3 external measured gases
|
|
FEATURES AND APPLICATIONS
The HYDROS® 100 Thermal Conductivity Analyzer contains a newly designed measuring cell that combines short response times with minimized
influence on flow variation. The cell contains two separate gas paths each equipped with two thermal sensors. One gas path is used by the sample gas, the
other is used for reference gas.
Although the HYDROS® 100 is equipped with only one channel it may be configured to alternatively measure a second gas mixture, display the values and distribute
them via a second analog output. The BINOS® 100 F, BINOS® 100 2M, CAT 100, CAT 200 or MLT Series simultaneously measure two gas mixtures.
For thermal conductivity detection, selectivity is certain only for binary or quasi-binary
gas mixtures – multi-component mixtures are commonly encountered in practice. The HYDROS® electronic compensation system can compensate up to 3 interfering gases if the measured
gas concentration is available as an analog input signal.
|
|
