Overview
PC-ControLab 2 (1998) is a Windows® is a Windows®-based process control loop simulation program, intended for use in process control training seminars and for self-study. It demonstrates the behavior of various control strategies, including feedback, ratio, cascade, feedforward, override, decoupling, and model-based control for dead-time compensation. The effect of tuning changes, loop disturbances and typical controller options can be explored. The realistic user interface resembles a typical process operator’s workstation, hence requires a minimal amount of user learning.

The BUILDER program, furnished with PC-ControLAB 2, allows for user creation of custom process models by graphically selecting, connecting and parameterizing from a library of 20 different function blocks. Each process model can contain up to 48 function blocks.

System Requirements
Minimum System Requirements: 80386 IBM-compatible processor, 4 MBRAM (486, 8 MB RAM or better recommended), VGA monitor, Microsoft Windows® 3.x or 95. (Can also run under Windows NT). 2 MB free space on hard disk.

Components: One program diskette and one laboratory exercises diskette. Users Manual. A set of preplanned laboratory exercises is included on diskette.

Single-user license: $395    Site license: $2500

Part Number: D750496X012

To order please call your local representative office, visit  http://www.emersonprocess.com/fisher/support/contactus/index.html for a list of contacts.