|
Our industrial densitometers are built to tackle the most difficult and demanding process and metering
applications. Rugged and reliable with very low maintenance, they have become the industry standard for on-line
density measurement.
Based on resonant frequency technology pioneered by ourselves, vibrating tube and fork sensors for pipes and
tanks are designed to handle liquids and slurries, including highly aerated fluids. Vibrating cylinder sensors
measure gas density and gas specific gravity.
|
| |
|
which product you require using our product selector...
|
Liquid Density Measurement
|
|
Liquid Density Transducers - Type 7835/45/46/47
The 7835/45/46/47 family of liquid densitometers,
feature a unique single straight-tube design. They are used in applications from high accuracy custody transfer measurement
or crude oil and refined products to simple quality control applications such as % fat in milk.
|
|
|
7826 Insertion Liquid Density Transducer
Where the high accuracy of the 7835/45/46/47 family of liquid densitometers is not required, we can
offer the lower cost 7826 insertion liquid density transducer. Offered in a wide range of wetted parts, it can be
used to measure most liquids and has been developed for applications requiring liquid density measurement in pipelines or tanks.
|
|
|
7826 Long Stem Density Transducer
The 7826 Long Stem Density Transducer is one of the latest developments in Mobrey's highly
respected family of vibrating fork sensors for liquid density measurement. Factory calibrated, the
7826 long stem density sensor is available in up to 4m/13ft lengths and is designed specifically
for open or closed tank applications.
|
|
|
7828 Insertion Density Transmitter
The 7828 is an insertion density transmitter for tank and pipe applications and operates with fluid
viscosities of up to 20,000cP. It is equipped with a configured microprocessor-based electronics package which
places full signal processing, calculation and diagnostic facilities within the transmitter itself.
|
|
|
|
7828 Long Stem Density Transmitter
The 7828 Long Stem Density Transmitter is another recent development. This extended length
version of our 7828 Insertion Density Transmitter is capable of measuring the density of a wide range
of liquids up to a maximum viscosity of 20,000cP.
|
Gas Density Measurement
|
|
7812 Gas Density Transducer
The 7812 is designed for continuous, accurate, instantaneous measurement of natural gas and
fuel gases. The key applicationof the 7812 is custody transfer measurement of natural gas.
|
|
|
3098 Gas Specific Gravity Transducer
The 3098, which is based on the 7812, is the industry standard for direct measurement of
gas specific gravity. It can also be used to determine base/relative density and make inferred measurements of
Wobbe Index and calorific value.
|
Density Analyser Systems
|
|
Density Analyser Systems for Oil and Petrochemical
Applications
For any instrument to measure correctly, it requires a representative sample. Mobrey can
offer fast loop density analyser systems with our density transducers that ensure a representative sample at the correct flow
rate is being measured to give the optimum density performance. Each density analyser system is tailor made to the application.
|
Signal Converters
|
|
795x Flow Computers and Signal Converters
Our range of flow computers and signal converters are used in a wide variety of applications in both oil and gas transfer systems.
|
