Hagan 2½ x 5 Thrust Type Swivel Mount Power Positioner

---

		True Positioning Devices – All power positioners assume a definite position of the crosshead or operating lever for each demand signal variation through the action of an integral feedback mechanism. Characterized Positioner – All positioners are equipped with a standard rotary cam or cam bar which produces a straight line relationship between input signal and output motion. Square or square root and blank cams are available. Air Lock – Designated models are equipped with an internal locking mechanism which stops and locks the positioner in the control position existing at the moment of air supply failure until air pressure is restored. System air locking schemes are also available.
	Fail Safe – Designated models can be equipped to drive the positioner to full open or full closed in case of air supply failure. NOTE: This feature should not be used with the air lock feature. Manual Operators – All torque type positioners are equipped with either a manual operating lever or a manual operating handwheel. Ambient Temperature – Positioners are generally suitable for operation from 0 to 140°F (-17,8 to 60°C) with a maximum rating of 300°F (149°C) for certain high temperature models. Dust Cover and Internal Heater – A dust cover is provided with or without heater and thermostat for certain torque type models. Limit Switches and Position Transmitters – Limit switches and position transmitters are available on designated models. Linkage – Clevises, linkage struts, and rigging accessories are available for all models, except the Heavy Duty Foot Mounting Type. Power Air Supply – Clean dry instrument air at 45 to 120 psig is required for cylinders of 8 inch diameter or less. For cylinders over 8 inches in diameter, the maximum air pressure for standard service is 100 psig and 250 psig for heavy duty service.
Torque & Load Data Stall Thrust 500 lbs (228 kg) Maximum Friction Load 125 lbs (57 kg) Minimum Weight Load 175 lbs (79 kg) Options Fail safe (loss of power air) Pivot base I/P signal convertor Anchor pivot pin for CE Dual limit switches Accessories Clevis, clevis pin and retaining rings are included. An air filter regulator is required but is not included.

FEATURES AND APPLICATIONS Industry needs muscle to control process valves, dampers and feed mechanisms accurately and in response to a demand signal. Hagan pneumatic power positioners have been satisfying these exacting control requirements for many years in countless applications – from steel mills to refineries – where positioning speed and accuracy are taken for granted. Hagan power positioners offer accessories such as limit switches, position transmitters, heated enclosures, air failure lock, and characterized cams that provide an output motion that is a function of the input signal.