| |
Rosemount
3095MFA Mass ProBar® Flowmeter
 The
Rosemount 3095MFA Mass ProBar Flowmeter
integrates the strengths of the Rosemount 485 Annubar®
sensor with additional high performance characteristics
provided by the Rosemount 3095 MultiVariable. The flowmeter accurately
measures static pressure, temperature, DP, and
calculates dynamically compensated mass flow, through a
single pipe penetration. The Rosemount 3095MFA Mass ProBar®
provides higher accuracy over a wider flow turndown than
traditional DP technology and provides the most advanced
method of measuring flow.
- Single Device Measures Three Variables: Continuously measures DP, pressure, and process temperature through a single pipe penetration
- Mass Flow Output: Dynamically calculates compensated mass flow
- Easy Configuration: Easy to use Engineering Assistant enables comprehensive configuration, maintenance, and diagnostic functions
- Integral Temperature Measurement: Annubar sensor incorporates an RTD through a sealed thermowell allowing removal without system shut-down
- Reduced Total Installed Cost: One device, instead of three, allows simple installation and low maintenance costs
Applications for the Rosemount 3095MFA Mass ProBar
Flowmeter Series
Ideal for gas and steam measurement applications in a variety
of industries, including:
- Oil and Gas Production
- Refining
- Petrochemical
- Power
- Utilities
- Pulp and Paper
- Natural Gas
General Specifications |
| Accuracy |
+/- 0.9% of mass flow rate for gas and steam |
| Turndown |
8:1 |
| Output |
4-20mA signal based on HART® Communication |
| Sensor Material |
316 Stainless Steel or
Hastelloy®
C-276 |
| Mounting Options |
Pak-Lok, Flanged with opposite side
support, Flange-Lok, Threaded Flo-Tap, and Flanged Flo-Tap (note:
Manual and Gear Drives are available for both of the Flo-Tap mounting
styles) |
| Line Size |
- 2-in. to 8-in. (50 to 200 mm) – Sensor Size 1
- 6-in. to 36-in. (150 to 900 mm) – Sensor Size 2
- 12-in. to 72-in. (300 to 1800 mm) – Sensor Size 3
|
More Information
|
|
|
|
|
Emerson Process Management,
Rosemount Division, 8200 Market Blvd.
Chanhassen, MN USA 55317
North America: 1-800-999-9307 International:
952-906-8888 Fax: 952-949-7001
|
|
|
