|
|
 |
|
|
| |
Built-in Physical Properties Database
Included in the 3095 Engineering Assistant is
an extensive physical properties database allowing dynamic calculation of density or
compressibility, viscosity, and related fluid data for over 110 fluids, shown below. The
data is based on information published by American Institute for Chemical Engineers
(AIChE). An option also exists for Custom Fluids.
(Additional fluids from AIChE database available on request.)
Engineering Assistant Fluid Database |
| Acetic Acid |
Ethylene |
Nitrobenzene |
Vinyl Cyclohexane |
| Acetone |
Ethylene Glycol |
Nitroethane |
Water |
| Acetonitrile |
Ethylene Oxide |
Nitrogen |
1-Butene |
| Acetylene |
Fluorene |
Nitromethane |
1-Decene |
| Acrylonitrile |
Furan |
Nitrous Oxide |
1-Decanal |
| Air |
Helium-4 |
n-Butane |
1-Decanol |
| Allyl Alcohol |
Hydrazine |
n-Butanol |
1-Dodecene |
| Ammonia |
Hydrogen |
n-Butyraldehyde |
1-Dodecanol |
| Argon |
Hydrogen Chloride |
n-Butyronitrile |
1-Heptanol |
| Benzene |
Hydrogen Cyanide |
n-Decane |
1-Heptene |
| Benzaldehyde |
Hydrogen Peroxide |
n-Dodecane |
1-Hexene |
| Benzyl Alcohol |
Hydrogen Sulfide |
n-Heptadecane |
1-Hexadecanol |
| Biphenyl |
Isobutane |
n-Heptane |
1-Octanol |
| Bromine |
Isobutene |
n-Hexane |
1-Octene |
| Carbon Dioxide |
Isobutylbenzene |
n-Octane |
1-Nonanal |
| Carbon Monoxide |
Isopentane |
n-Pentane |
1-Nonanol |
| Carbon Tetrachloride |
Isoprene |
Oxygen |
1-Pentadecanol |
| Chlorine |
Isopropanol |
Pentafluorothane |
1-Pentanol |
| Cholortrifluoroethylene |
Methane |
Phenol |
1-Pentene |
| Chloroprene |
Methanol |
Propane |
1-Undecanol |
| Cycloheptane |
Methyl Acrylate |
Propadiene |
1,2,4-Trichlorobenzene |
| Cyclohexane |
Methyl Ethyl Ketone |
Pyrene |
1,1,2-Trichloroethane |
| Cyclopentane |
Methyl Vinyl Ether |
Propylene |
1,1,2,2-Trichlorofluoroethane |
| Cyclopentene |
m-Chloronitrobenzene |
Steam |
1,2-Butadiene |
| Cyclopropane |
m-Dichlorobenzene |
Styrene |
1,3-Butadiene |
| Divinyl Ether |
Natural Gas |
Sulfur Dioxide |
1,3,5-Trichlorobenzene |
| Ethane |
Neon |
Toluene |
1,4-Dioxane |
| Ethanol |
Neopentane |
Trichloroethylene |
1,4-Hexadiene |
| Ethylamine |
Nitric Acid |
Vinyl Acetate |
2-Methyl-1-Pentene |
| Ethylbenzene |
Nitric Oxide |
Vinyl Chloride |
2,2-Dimethylbutane |
Steam - ASME
The 3095 dynamically calculates steam density for superheated and saturated
steam over the entire operating range. Steam densities are calculated in accordance with ASME steam tables. For saturated steam applications, the 3095 can also be
configured for density calculations based on static pressure only (no RTD input).
Natural Gas - A.G.A. / ISO
The 3095 calculates natural gas compressibility using either
Gross or Detail Characterization Methods. The flow calculations are performed according to 1992 A.G.A.
(American Gas Association) Report No. 3, with A.G.A. Report No.8 for the compressibility
factor. ISO 12213 Molar Composition and Physical Properties options are also
supported.
Upgrade Software
Engineering Assistant (EA) for HART Protocol:
Engineering Assistant (EA) for FOUNDATION™ fieldbus
Protocol:
|
|
|
|
|
|
Emerson Process Management,
Rosemount Division, 8200 Market Blvd.
Chanhassen, MN USA 55317
North America: 1-800-999-9307 International:
952-906-8888 Fax: 952-949-7001
|
|
|
|
|
|
 |
